Filter
Top Products
CHAPTER 5 ND-70895 (E)
Page 74
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
3.5 Name Display
3.5.1 Functional Outline
This service is for displaying information (user’s name, station number, etc.) on the LCD of D
term
.
1. Catch internal call
2. Catch Forwarding Call from Call Forwarding Busy Line, Call Forwarding Absent, Call Forwarding
Don’t Answer, Station Hunting, or etc..
3.5.2 Using Conditions
1. Maximum 16 digits of user’s information can be displayed on LCD according to internal numbers.
2. What is available for this service to display, is alphabet, digit, sign or etc..
3. For administrating user’s information clearly, it is not available to use both “Name Display Service”
which is assigned by ANDD command and “OAI Service” at same time.
4. It is not available to use both 8-digit Display Service and 16-digit Display Service at same time. For
changing from 8-digit Display Service to 16-digit Display Service, can be changed by using
“System Data”.
5. There are limitations below for 16-digit Display Service.
• User’s information can not be displayed on the top line of LCD.
• User’s information is displayed from the left side of bottom line and if the information is less than
16-digit, the rest of frames will be blank.
• It is not able to set multi-line on this D
term
.
6. There is a limitation below for 8-digit Display Service.
• User’s information is displayed from the middle of top line and if the information is less than 8
digits, the rest of frames will be blank. And the bottom line will display the clock.
7. If the user’s information is not assigned, normally station number will be displayed.
8. There is no guarantee for the user’s information since you change from 16-digit Display Service to
8-digit Display Service.
9. The service will be effective, if either of calling party or called party has D
term
which has the LCD.