Filter
Top Products
ND-70895 (E) CHAPTER 5
Page 77
Revision 1.0
OFFICE DATA DESIGN
Procedure for Setting Office Data for OAI Services
11. The objected terminal of Name Display Service is only D
term
which has LCD.
12. “Office Code” + “Station Number” is normally displayed. However, when use of a logical number
is specified, only the logical number without an office code is displayed. (ONE CCIS network is
assigned only one logical number.)
13. When a call has been transferred by “Call Forwarding All Outside Line Call” or “Call Forwarding-
Busy Outside Line Call”, the LCD of Calling Party’s D
term
will display “Name Information” of
Called party, instead of dialed number.
14. When you call to a party by the way of a party which doesn’t have Inter Node Name Display Service
in CCIS network, or the other Node of CCIS network, the Name Display Service will not serve.
15. This service can not be used in conjunction with ISDN Information Transfer-CCIS Service.
16. Those below are the Inter Node Services which are able to serve Inter Node Name Display.
•Voice Call
• Inter Node Call Forwarding All Call
• Inter Node Call Forwarding Busy Line
• Inter Node Call Forwarding No Answer
• Inter Node Camp On (Only for calling)
• Message Reminder (Only for outgoing)
17. Those below are the Self Node Services including CCIS Trunk which are able serve Inter Node
Name Display.
•Call Pick Up
• Ringing for Call Hold
• Answering for call park
• Call waiting
• Catching call from UCD Queuing
18. For the terminal which is able to serve Inter Node Display Service, please see the Item of Name
Display Service.
B Office
C Office
E Office
A Office
D Office
(Name Display
- System - CCIS is
not serviced)
CCIS
CCIS
CCIS
CCIS
CCIS
(1)
(2)
In the case of (1): Name Display is serviced.
In the case of (2): Name Display is not serviced.
In the case of (3): Name Display is not serviced.