Filter
Top Products
ND-70895 (E) CHAPTER 4
Page 27
Revision 1.0
COMMANDS
Commands
3. Commands
This section explains the commands in used in the OAI System.
3.1 List of Commands
Table 4-1 shows a list of commands in use in the OAI system. As for any command other than those in the
list, refer to the Feature Programming Manual and Office Data Specification of the NEAX2400 IMX.
Note 1:
Each command marked with *is used for listing up the assigned data, and thus its explanation will be
omitted.
Note 2:
For this command, refer to the Feature Programming Manual and Office Data Specification of the
NEAX2400 IMX.
Table 4-1 OAI System Command Table List
ABBREV.
COMMAND
COMMAND
AADT Assignment of Announcement/Dictation Trunks
ACNO Assignment of Conversion Number Data
AKYD Assignment of Key Data for D
term
AMNO Assignment of Monitored Number
AOAC Assignment of OAI Access Code
AOKC Assignment of OAI Key Code
ARNP Note 2 Assignment of Reverse Numbering Plan Data
ASPA Assignment of Specific Attendant Number
ASYD
ASYDN
ASYDL
Assignment of System Data
DFLN Display of Location Free Numbering
LADT Note 1 List Up of Announcement/Dictation Trunks
LCNO Note 1 List Up of Conversion Number Data
LMNO Note 1 List Up of Monitored Number
LOAC Note 1 List Up of OAI Access Code
LOKC Note 1 List Up of OAI Key Code