Mitel 5550 IP Console Telephone User Manual


 
72 Reference
Monitor Busy
The extension you are trying to monitor is already being monitored
from another station.
MSG Waiting
After pressing the [Check MSG Waiting] softkey, this indicates that
the extension has message(s) waiting.
MSG Waiting OFF
Confirmation that you turned off an extension’s message waiting
indicator by pressing the [Clear MSG Waiting] softkey.
MSG Waiting ON
Confirmation that you turned on an extension’s message waiting
indicator by pressing the [Set MSG Waiting] softkey.
Must CANCEL before dialing
Press Cancel on the console keypad, and the try dialing again.
Network
Shows if you have dialed over a MSDN/DPNSS (Digital Private
Network Signaling System) line, which connects 3300 ICPs in a
private network.
No Answer
There was no answer at the extension called.
No call to answer at specified incoming position
Verify your Incoming Calls display. Another attendant may have
answered the call while your list was “frozen”, or the caller may have
hung up.
No call to retrieve at specified hold position
Verify your Calls on Hold display. Another attendant may have
transferred the call while your list was “frozen”, or the caller may have
hung up.
No call to retrieve at specified transferred position
Verify your Transferred Calls display. Another attendant may have
transferred the call while your list was “frozen”, or the caller may have
hung up.
Not Ready
The data call cannot be completed at this time. Try again later.
Operator Absent
If you have changed the status of your console to Operator Absent,
this message is displayed in the DEST area of the console of another
attendant who calls you.
Out of Service
The device you dialed is not in service.
Overriding
Confirmation message when you override a busy party.
Page Zone Busy
The zone number you dialed is busy; dial another zone code, or try
again later.
Page Zone Unassigned
Verify the number you dialed. If it still doesn’t work, contact your
communications department.