Filter
Top Products
Retrieveing the Parked Call
Linksys SPA-941 Telephone User Guide System Telephone Features 41
620-05600390
On-hook Dialing
You can dial a number while the handset is on-hook by doing one of the following:
• Dial the phone number on the keypad and press the dial softkey.
• Press the dir softkey, use the scroll keys to select a person to call, then
press the dial softkey.
• Press the redial softkey, use the scroll keys to select a person to call, then
press the dial softkey.
NOTE: You can pick the handset up at any time to conduct a private conversation.
Permanent Caller ID Block Release
If you chose to have your caller ID information blocked on all calls, this feature
allows your caller ID information to be sent for this call only.
Your caller ID may be required for some calls to be completed. If your call will not
be accepted without caller ID information you may get a message that the number
you called will not accept anonymous (no caller ID) calls. You may use this feature
to send caller ID information for that call only.
To allow your caller ID to be displayed on the phone you are calling:
1. Press *82.
2. Press the dial soft key or pickup the handset.
3. Dial the desired phone number.
The called number should either ring or be busy. You should not get the
anonymous call rejection message.
Picking Up a Parked Call
This feature lets you pick up a specific parked call from a group of parked calls.
When parked, a call is assigned an ID number by the system. Using the parked call
ID, you can pick up the parked call from anywhere in the system.
NOTE: This telephone does not allow calls to be parked. The phone can only be used to
retrieve parked calls.
Retrieveing the Parked Call
1. Pick up the handset or press the speaker button (if available).