Filter
Top Products
Group Call Pickup
Linksys SPA-941 Telephone User Guide System Telephone Features 27
620-05600390
Call Return
Using this feature dials the telephone number of the last incoming call. However, if
the caller is shown as “Unknown”, then Call Return will not work.
1. Press *69 on the telephone keypad.
2. Press the dial soft key.
3. Pickup the handset or press a line or Speaker button.
4. A voice prompt will repeat the last incoming number. You may press 1 to
return the call or hang up.
5. If you entered 1, wait for the called party to answer.
Call Trace
Call Trace allows you to record the telephone number of an offending call, but must
be performed immediately after the offending call is ended.
NOTE: The feature will not work if Call Waiting is triggered while you are receiving the
offending call.
1. Hang up.
2. Press *57 on the telephone keypad.
3. Press the dial soft key.
4. Pick up the handset, or press a line or the Speaker button.
The last number that called you is traced. After you initiate Call Trace, a recording
informs you if the trace succeeded and provides you with an 800 number you can
use to take legal action.
Your phone number and the caller ID of the offending caller is recorded in the
phone system’s Call Data Record (CDR). Check with your service provider to
retrieve the phone number of the traced call from the CDR. Note the time and date
that you traced the call, as this will help the system administrator find the call in the
CDR file.
Call Waiting
If your phone is configured with Call Waiting, you can answer an incoming call
without disconnecting from the current call.
If a call comes in while you are on the phone, you will hear a single beep repeated
approximately every ten seconds.