Filter
Top Products
52 Using Voice Recognition
5.
When you are finished with the call,
press if the swivel is open, or in
if the swivel is closed. You cannot end the
call with a voice command.
Erasing voice tags
To erase all voice name dial recordings in your phone:
1. Menu
→
Settings
→
Voice Features
→
Delete Voice Dial
.
2.
Select
Yes
.
Calling using digit dialing
When using digit dialing, you speak digits to dial a
phone number.
Note:
You cannot speak a string of digits. You must
speak one digit at a time and wait for the prompt.
1.
From the home screen, press . The phone
responds: “Say a name or say Dial.”
2.
Say “D
ial”
. The phone responds: “Speak a digit.”
3.
Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
If you pause, the phone will prompt you with
the following five options. After the prompt,
speak an option.
–Say
“Clear”
to erase the digit last entered.
The phone responds: “Digit cleared.”
To clear the entire phone number, say
“Clear”
again. When the phone prompts you
with “Clear entire phone number?”, say
“Yes”
to clear or
“No”
to cancel.
–Say
“Call”
to dial the number.
–Say
“Verify”
to cause phone to repeat the set
of digits that you input.
–Say
“Cancel”
to exit voice recognizer and
return to the home screen.
– Speak a digit to enter the next digit. Once
the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.
Using voice features with
hands-free car kits
You can use voice commands to make a phone call
or to answer the phone only if your phone is
connected to a professionally installed Kyocera
hands-free car kit (sold separately).
Note:
The following features apply only to installed
hands-free car kits unless noted.
To shop for hands-free car kits, visit
www.kyocera-wireless.com/store
or call
800 349-4188 (U.S.A. only) or 858 882-1410.
Waking up the phone
If your phone is connected to a Kyocera installed
hands-free car kit, you can use the voice command
to activate the phone to make a phone call.
Note:
Voice Wake-up does not work with
Keyguard active.
To activate the Voice Wake-up setting:
1.
Select
Menu
→
Settings
→
Voice Features
→
Voice Wake-Up
→
With ext. pwr.