Filter
Top Products
User Guide for the Kyocera Koi Phone 19
4USING THE CAMERA
Tips before operating your
camera
• You cannot activate the camera while on an active
call or while browsing files in the media gallery.
• The lens cover must be open before you can
take a picture.
Note:
When the phone is powered on and in an
idle state, opening the lens cover causes the
phone to automatically go into camera mode.
• Once the camera is active, the home screen acts
as the viewfinder.
• If you get a “Low memory” error on your
phone’s screen, check your resolution and
quality compression settings. See “Setting up
the camera” on this page.
• If there is no activity within approximately
45 seconds after you turn your camera on, then
the camera quits and returns to the previous
launch point.
• Menu settings and options can only be accessed
when the camera is active.
Setting up the camera for photos
1.
With the swivel open, select
Menu
→
Camera.
2.
Select
Options
.
3.
Scroll left or right on the horizontal menu bar
using .
4.
Select
Settings
.
5.
Scroll down to highlight an option and press :
–
Flash
On, Off, or Automatic.
–
Resolution
options are 1280 x 960 (best for
printing), 640 x 480, 352 x 288, 320 x 240
(best for sending to email and viewing),
176 x 144, 160 x 120.
–
Low Light Mode
brightens the picture for
low light environments.
–
Self Timer
options are Off (default) or 3, 5,
or 10 second pauses. When set, the camera
beeps tones from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when
Multishot
mode is activated.
–
Multishot
options are On or Off (default).
When set to On, the camera allows you to
take multiple pictures (up to six) while the
camera key is pressed and held. A tone will
play each time a picture is taken. A second
tone will play when the final picture is taken.
–
Shutter Sound
sets the sound used when the
shutter closes while taking a picture.