Filter
Top Products
C
HAPTER
1: A
BOUT
Y
OUR
S
ELEC
S
ET
500A
M
ESSAGING
HCXTD840, Issue 1, July 2001 1-55
The <CLME>
key and MW
status
The <CLME> key indicates message lamp status only
when someone calls you. If you call a station, the
<CLME> key does not indicate the status of the message
waiting lamp.
When there
are multiple
attendants
In facilities with multiple attendant consoles, the
<CLME> key on all attendants indicates the message lamp
status of calling stations.
Turning off
MW lamps-
limitations
Pressing a lit <CLME> key or dialing the callme
cancellation code only turns off message waiting lamps
turned on by the <CLME> key on an attendant console.
Message waiting lamps can also be turned on through the
CommCenter or VMS (voice message system). When a
callme message is returned, it rings at both the <INF> and
<ANS> keys. Press either key to answer the call.
Automatic
deletion of
callme message
When a station returns a callme message, the message is
automatically deleted. SelecSet users can use the
<DELETE> soft key to delete callme messages without
returning them.
Return feature
access code for
non-SelecSets
A station's message waiting lamp may have been activated
by someone other than the attendant text message center or
voice message system, for example. Therefore, users who
do not have SelecSets (with a <RETURN> soft key)
should use the return feature access code (usually #0) to
respond to their message lamps.