Filter
Top Products
C
HAPTER
2: A
DDITIONAL
O
PERATIONS
L
ABELING
I
NSTRUCTIONS
HCXTD840, Issue 1, July 2001 2-97
Labeling Instructions
Key labeling After you program your SelecSet, you should label your
keys. The fixed keys, hold loops and <INC>, <RCL> and
<INF> keys are pre-labeled. Your SelecSet 500A also
comes with sheets of pre-printed and blank labels for use
on suggested and optional programmable keys such as
specific autodial numbers or trunk group answer keys.
Procedure To label your keys:
1
Insert the entire label sheet in a typewriter.
2
Type on the desired label.
3
When you finish labeling your SelecSet, keep the
sheet in case you reprogram your keys.
4
To verify that you have the proper key for the label,
press <DSPL> plus any programmable key. If the key
is programmed, the bottom line of the display shows
the key number plus the feature or autodial number
assigned to the key; if not, the key number plus
Autodial displays.
5
Press <DSPL> plus any soft key to return to the
normal display.
6
Remove the label and place it carefully on the key.