Filter
Top Products
T
RUNK
A
NSWER
F
ROM
A
NY
S
TATION
(TAFAS)
S
ELEC
S
ET
500A U
SER
G
UIDE
2-92 HCXTD840, Issue 1, July 2001
Programming Your SelecSet 500A
About
programmable
keys
Programmable keys consist of suggested programmable
keys, and optional programmable keys. Refer to
“Programmable Keys” on page 1-20, for general
information on programmable keys. Some of these keys
can be programmed from your SelecSet; others must be
programmed from the CMAT. See Table 2-3 for a list of
keys that you can program at your console.
Table 2-3 SelecSet 500A Programmable Keys
Key Name Purpose
Account code
(ACCODE)
Types of account codes:
Fixed account codes have a fixed number of digits.
Variable account codes have a variable number of digits.
The # signals the end of the account code.
Using account codes:
Before making the call: dial the account code feature
access code, (ACFAC) the account code (AC) (or press a
key on which an account code has been programmed), then
the phone number.
During the call: press a key programmed with the ACFAC
and the AC. Your call is not interrupted. If you do not have
a pre-programmed key, ask the party to hold. Press
<TRANSFR>, dial the ACFAC + the AC, and wait for
confirmation tone. Press the flashing CAP to resume your
call.
Autodial keys provide one-key access to dial-access codes, account codes,
and frequently called numbers.