Filter
Top Products
C
ONFERENCING S
ELEC
S
ET
500A U
SER
G
UIDE
1-46 HCXTD840, Issue 1, July 2001
Conferencing
Types of
conferences
You can set up two types of conferences using your
SelecSet 500A attendant console. These include:
• Three-party conferences
- setting up a three-party conference the standard way
- setting up a three-party conference using bridged
CAPs
• Multiparty conferences of up to six parties.
Creating a
standard
three-party
conference
You can set up a three-party conference, consisting of as
many as two outside parties. To create a three-party
conference:
1
While connected to one party, dial the station number
of a second party.
The first party is placed in consultation hold and an
idle CAP is automatically selected for you.
2
To cancel the call and return to the caller, press
<CNCL>.
Procedure,
continued
3
To announce the conference, wait until the called
party answers and make your announcement.
4
To connect all parties immediately, press <CONF> as
soon as the called party picks up. (Wait for the party
to pick up before pressing <CONF>. Pressing
<CONF> before the called party picks up is ignored.)
When the conference is formed, your display
indicates how many parties are in the conference.
5
To disconnect the last person added to the conference,
press <CNCL>.