Filter
Top Products
E
NTERING
T
EST
M
ODE S
ELEC
S
ET
500A U
SER
G
UIDE
A-2 HCXTD840, Issue 1, July 2001
Entering Test Mode
Procedure
1
Flip the test switch in the direction of the arrow as
shown in Figure A-1.
2
Unplug the telephone line coming into the console,
then plug it back in (the telephone line plugs into the
phone at the jack labeled Line.)
Figure A-1: Attendant console control panel
3
All lamps on the console flash and the display flashes
the word TEST.
Figure A-2: Console test display
4
Make sure that all lamps are working properly.
5
Press any key under the display to proceed.
4W 2W TESTLINE RECOUT
######### #########
#######
######
#########
#########
###########
#
#
#
#
#
#
##
#
#
##
#
#
#
#
#
#
#
###########
#
#
#
#
#
#
#