Filter
Top Products
DVP-ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming
3-226
API Mnemonic Operands Function
81
D PRUN P
Parallel Run
Controllers
ES2/EX2 SS2 SA2
SE
SX2
Bit Devices Word devices Program Steps Type
OP
X Y M S K H KnX KnY KnM KnS T C D E F
S * *
D * *
PRUN, PRUNP: 5 steps
DPRUN, DPRUNP: 9
steps
PULSE 16-bit 32-bit
ES2/EX2 SS2
SA2
SE
SX2 ES2/EX2 SS2
SA2
SE
SX2 ES2/EX2 SS2
SA2
SE
SX2
Operands:
S: Source device D: Destination device
Explanations:
1. This instruction sends the content in S to D in the form of octal system
2. The start device of X, Y, M in KnX, KnY, KnM format should be a multiple of 10, e.g. X20, M20,
Y20.
3. When operand S is specified as KnX, operand D should be specified as KnM.
4. When operand S is specified as KnM, operand D should be specified as KnY.
Program Example 1:
When X3 = ON, the content in K4X20 will be sent to K4M10 in octal form.
X3
PRUN K4X20 K4M10
X37
M27
X36 X35 X34 X33 X32 X31 X30 X27 X26 X25 X24 X23 X22 X21 X20
M17M16 M15 M14M13 M12 M11 M10
M26 M25M24 M23 M22 M21 M20 M19M18
No change
Program Example 2:
When X2 = ON, the content in K4M10 will be sent to K4Y20 in octal form.
X2
PRUN K4M10 K4Y20
Y37
M27
Y36 Y35 Y34 Y33 Y32 Y31 Y30 Y27 Y26 Y25 Y24 Y23 Y22 Y21 Y20
M17M16 M15 M14M13 M12 M11 M10
M26 M25M24 M23 M22 M21 M20 M19M18
These two devices will not be transmitted