Filter
Top Products
DVP-ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming
Master PLC Preset value Slave PLC Preset value
D1480 ~ D1495 K5,000 D100 ~ D115 of Slave ID#1 K5,000
D1496 ~ D1511 K1,000 D200 ~ D215 of Slave ID#1 K1,000
D1512 ~ D1527 K6,000 D100 ~ D115 of Slave ID#2 K6,000
D1528 ~ D1543 K2,000 D200 ~ D215 of Slave ID#2 K2,000
d) and D200
12. ard
Up to16 Slaves can be accessed through PLC LINK. For allocation of D100 ~ D115
~ D215 in each Slave PLC, please refer to the tables of Special M and Special D of this
function in previous pages.
Example 2: Conncet DVP-PLC with VFD-M inverter and control the RUN, STOP, Forw
operation, Reverse operation through PLC LINK.
a) Write the ladder diagram program into Master PLC (ID#17)
M1002
MOV K17 D1121
H86 D1120
K6
K2
M1351
END
MOV
SET M1120
MOV
D1434
MOV
D1450
M1350
H2100
X1
H2000
MOV
D
Starting reference of
to be written
rence of data
Slave
Data length to be read
Retain communication setting
COM2 communication protocol
Master ID#
Auto mode
MOV
D1355
Starting refe
to be read on
Data length to be witten
data
1415
on Slave
Enable EASY PLC LINK
SET 1355
S lave to be linked manually
M
et the S
SET 1360M
K1MOV
ID# of the starting Slave
Link Slave ID#1
b) the Slav e linked Set ON link
c) 2105 ma o registers X1 = O LINK
data i H2105 485.
Address H2000-H2001 maps to registers D1496-D1497 of PLC. When X1 = ON, PLC LINK
D1399
M1355 = ON. Set e to b manually by M1360~M1375. M1360 to
Slave ID#1.
Address H2100-H ps t D1480-D1485 of PLC. When N, PLC
executes, and the n H2100- will be displayed in D1480-D1
d)
executes, and the parameter in H2000-H2001 will be specified by D1496-D1497.
2-82