Delta DVP-ES2/EX2/SS2/SA2/SX2/SE Two-Way Radio User Manual


 
DVP-ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming
a terrupt) correspondingly work together with C243,
41 and D1240.
terrupt) correspondingly work together with C246,
count value to D1241 and D1240
terrupt) correspondingly work together with C244,
o D1243 and D1242.
terrupt) correspondingly work together with C250,
t value to D1243 and D1242.
) When X0 (counter input) and X1 (external In
and I100/I101, PLC will move the count value to D12
b) When X0 (counter input) and X4 (external In
C248, C252 and I400/I401, PLC will move the
c) When X2 (counter input) and X3 (external In
and I300/I301, PLC will move the count value t
d) When X2 (counter input) and X5 (external In
C254 and I500/I501, PLC will move the coun
Example:
EI
M1000
DCNT
C243 K100
FEND
M1000
I101
IRET
END
DMOV
D1240 D0
When ex rrupt (X ) occu ng ng ss of C243, the cou e
C243 ) and C ter this su
Function Gr
N
Cont
W
hardw
Func
oint is achieved.
M1308, D1312
Contents:
When zero point is achiev se signal by this
function. Input terminals X2 n M1308= ON,
D1312 is the setting re -30,000~30,000.
Specified value exceeds the ra . When
D1312 is set to 0, the a
Functions of other inpu
X4 CH1 DOG si put
X5 CH1 LSN sign
ternal inte 1, I101 rs duri counti proce nt valu in
will be stored in (D1241, D1240 243 is reset. Af , the interrupt broutine I101
will be executed
oup
Enabling force-ON/OFF of input point X
umber
M1304
ents:
hen M1304 = ON, WPLSoft or ISPSoft can set ON/OFF of input pont X, but the associated
are LED will not respond to it.
tion Group
Output specified pulses or seek Z phase signal when zero p
Number
ed, PLC can output specified pulses or seek Z pha
, X3 are the Z-phase signal input point of CH1, CH2. Whe
gister to specify the additional pulses within the range
nge will be changed as the max/min value automatically
dditional pulses output function will be disabled.
t terminals:
gnal input X6 CH2 DOG signal in
al input X7 CH2 LSN signal input
2-72