Filter
Top Products
410 Gone
412 Conditional Request Failed
413 Request Entity Too Large
414 Request-URI Too Long
415 Unsupported Media Type
416 Unsupported URI Scheme
420 Bad Extension
421 Extension Required
423 Interval Too Brief
429 Provide Referrer Identity
480 Temporarily Unavailable
481 Call/Transaction Does Not Exist
482 Loop Detected
483 Too Many Hops
484 Address Incomplete
485 Ambiguous
486 Busy Here
487 Request Terminated
488 Not Acceptable Here
489 Bad Event
491 Request Pending
493 Undecipherable
494 Security Agreement Required
Server Failure 5xx
500 Server Internal Error
501 Not Implemented
502 Bad Gateway
503 Service Unavailable
504 Server Time-out
505 Version Not Supported
513 Message Too Large
580 Precondition Failure
Global Failures 6xx
600 Busy Everywhere
603 Decline
604 Does Not Exist Anywhere
606 Not Acceptable
7. Summary of Implemented Features and Specifications
The PHONE ADAPTER is a full featured, fully programmable phone adapter that can be custom
provisioned within a wide range of configuration parameters. The below feature descriptions are
written as a high-level overview to provide a basic understanding of the feature breadth and
capabilities of the PHONE ADAPTER. To understand the specific implementation of the below
features, including parameters, requirements and contingencies please refer the section PHONE
ADAPTER Feature Configuration Parameters, section Error! Reference source not found..
7.1. Data Networking Features
7.1.1. MAC Address (IEEE 802.3)
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
95