Filter
Top Products
CWT8 Cadence Cadence script for distinctive CWT 8 CadScript 2.3(..3/2)
Ring Waveform Waveform for the ringing signal {Sinusoid,
Trapezoid}
Sinusoid
Ring Frequency Frequency of the ringing signal. Valid values
are 10 – 100 (Hz)
Uns8 25
Ring Voltage Ringing voltage. 60-90 (V) Uns8 70
CWT Frequency Frequency script of the call waiting tone. All
distinctive CWT is based on this tone.
FreqScript 440@-10
4.9.2. Progress Tones
Most of the 18 progress tones in the PHONE ADAPTER are played automatically in response to fixed
stimuli. However, the administrator can select which SIP response codes correspond to the 4 SIT
tones.
Response Status Code Handling
SIT1 RSC
1
SIP response status code to INVITE on which
to play the SIT1 Tone
RscTmplt
SIT2 RSC
1
SIP response status code to INVITE on which
to play the SIT2 Tone
RscTmplt
SIT3 RSC
1
SIP response status code to INVITE on which
to play the SIT3 Tone
RscTmplt
SIT4 RSC
1
SIP response status code to INVITE on which
to play the SIT4 Tone
RscTmplt
The Frequencies of the actual progress tones are configurable to accommodate local and regional
conventions.
Parameter Name Description Type Default
Dial Tone
1
Played when prompting the user to enter a
phone number
ToneScript 350@-19,440@-
19;10(*/0/1+2)
Second Dial Tone An alternative to <Dial Tone> when user
tries to dial a 3-way call
ToneScript 420@-19,520@-
19;10(*/0/1+2)
Outside Dial Tone
1
An alternative to <Dial Tone> usually used
to prompt the user to enter an external
phone number (versus an internal
extension). This is triggered by a “,”
character encountered in the dial plan.
ToneScript 420@-16;10(*/0/1)
Prompt Tone
1
Played when prompting the user to enter a
call forward phone number
ToneScript 520@-19,620@-
19;10(*/0/1+2)
Busy Tone Played when a 486 RSC is received for an
outbound call
ToneScript 480@-19,620@-
19;10(.5/.5/1+2)
Reorder Tone
1,2
Played when an outbound call has failed
or after the far end hangs up during an
established call
ToneScript 480@-19,620@-
19;10(.25/.25/1+2)
Off Hook Warning
Tone
2
Played when the subscriber does not
place the handset on the cradle properly
ToneScript 480@-
10,620@0;10(.125/
.125/1+2)
Ring Back Tone Played for an outbound call when the far
end is ringing
ToneScript 440@-19,480@-
19;*(2/4/1+2)
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
69