Cisco Systems Linksys PAP2 Telephone Accessories User Manual


 
G729b_Dynamic_Payload "99" ;
E_Codec_Name "NSE" ;
ne-event" ;
26r24_Codec_Name "G726-24" ;
"G726-32" ;
26r40_Codec_Name "G726-40" ;
rameters
UN_Test_Enable "No" ;
"" ;
T_IP "" ;
***
ne_Enable[1] "Yes" ;
FY" ;
T_Keep_Alive_Dest[1] "$PROXY" ;
*** Network Settings
;
; # options: low/medium/high/very high
P_Port[1] "5060" ;
T_SIP_Port[1] "" ;
# options: none/1-line/1-line excl.
line excl. OPT|NTFY|REG/full/full excl.
xcl. OPT|NTFY|REG
NS
AVT_Codec_Name "telepho
G711u_Codec_Name "PCMU" ;
G711a_Codec_Name "PCMA" ;
G726r16_Codec_Name "G726-16" ;
G7
G726r32_Codec_Name
G7
G729a_Codec_Name "G729a" ;
G729b_Codec_Name "G729ab" ;
G723_Codec_Name "G723" ;
# *** NAT Support Pa
Handle_VIA_received "No" ;
Handle_VIA_rport "No" ;
Insert_VIA_received "No" ;
Insert_VIA_rport "No" ;
Substitute_VIA_Addr "No" ;
Send_Resp_To_Src_Port "No" ;
STUN_Enable "No" ;
ST
STUN_Server
EX
EXT_RTP_Port_Min "" ;
NAT_Keep_Alive_Intvl "15" ;
#
Li
# *** Streaming Audio Server (SAS)
SAS_Enable[1] "No" ;
SAS_DLG_Refresh_Intvl[1] "30" ;
SAS_Inbound_RTP_Sink[1] "" ;
# *** NAT Settings
NAT_Mapping_Enable[1] "No" ;
NAT_Keep_Alive_Enable[1] "No" ;
NAT_Keep_Alive_Msg[1] "$NOTI
NA
#
SIP_TOS/DiffServ_Value[1] "0x68"
Network_Jitter_Level[1] "high"
RTP_TOS/DiffServ_Value[1] "0xb8" ;
# *** SIP Settings
SI
SIP_100REL_Enable[1] "No" ;
EX
Auth_Resync-Reboot[1] "Yes" ;
SIP_Debug_Option[1] "none" ;
OPT/1-line excl. NTFY/1-line excl. REG/1-
OPT/full excl. NTFY/full excl. REG/full e
# *** Call Feature Settings
Blind_Attn-Xfer_Enable[1] "No" ;
MOH_Server[1] "" ;
Xfer_When_Hangup_Conf[1] "Yes" ;
# *** Proxy and Registration
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
105