Filter
Top Products
expr = DQUOT val DQUOT
options = "[" *option "]"
option = key-opt / alias-opt / post-opt
key-opt = "--key" key-string
key-string = password / quoted-pass-phrase / hex-string
alias-opt = "--alias" val
post-opt = "--post" val
url = [ method "://" [ server [":" port]]] "/" *(dir "/") file
method = "tftp" / "http" / "https"
server(**) = ip4quad / fqdn
( * ) Attribute can contain the name of any configuration parameter
( ** ) If the server and scheme are unspecified, the TFTP server name provided by the LAN’s DHCP
server is used instead. Also, an FQDN with multiple DNS entries is multiply resolved by the PHONE
ADAPTER.
The variables available for macro substitution (with example values) are as follows:
PN PAP2 Product Name
PSN PAP2 Product Series Number
MA 000f66aaa010 MAC Address
MAU 000F66AAA010 MAC Address (upper case)
MAC 00:0f:66:aa:a0:10 MAC Addr with Colon separators
SN CH500D600862 Serial Number
SWVER 1.0.2 Firmware Version Number
HWVER 1.0.1 Hardware Version Number
UPGCOND 1.0.2<1.1 Upgrade(*) Condition
SCHEME tftp Access Scheme
SERV http.example.com Server Name
SERVIP 10.2.3.200 Server IP Address
PORT 69 TCP/IP Request Port
PATH /guest/pap2.cfg File path
IP 192.168.1.102 IP address of the PHONE ADAPTER
EXTIP 45.73.21.44 Configured or discovered external IP
address (for example using STUN)
PRVST 0 Error Code of Last Profile Rule(**)
UPGST 0 Error Code of Last Upgrade Rule(**)
ERR corrupt file Error/Info(***) message
A to P some-value Contents of GPP_A to GPP_P
SA to SD some-value Contents of GPP_SA to GPP_SD
( * ) Note that the UPGCOND term is particularly useful in the Upgrade_Rule (discussed later in this
document), but applies equally as a resync condition. It shows which term of the rule triggered the
operation.
( ** ) See section 6.5 for the values of these macro variables.
( *** ) Upon successful firmware upgrade, the ERR variable carries the version of the newly installed
load.
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
39