Filter
Top Products
wildcard characters. It can contain up to 39 characters. Examples: “1408*, 1510*”,
“1408123????, 555?1”.
• RscTmplt – A template of SIP Response Status Code, such as “404, 5*”, “61?”, “407, 408, 487,
481”. It can contain up to 39 characters.
• CadScript – A mini-script that specifies the cadence parameters of a signal. Up to 127
characters. Syntax: S
1
[;S
2
], where
S
i
=D
i
(on
i,1
/off
i,1
[,on
i,2
/off
i,2
[,on
i,3
/off
i,3
[,on
i,4
/off
i,4
[,on
i,5
/off
i,5
[,on
i,6
/off
i,6
]]]]]) and is known as a section,
on
i,j
and off
i,j
are the on/off duration in seconds of a segment and i = 1 or 2, and j = 1 to 6. D
i
is the
total duration of the section in seconds. All durations can have up to 3 decimal places to provide 1
ms resolution. The wildcard character “*” stands for infinite duration. The segments within a
section are played in order and repeated until the total duration is played. Examples:
Example 1: Normal Ring
60(2/4)
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 60 s
Number of Segments = 1
Segment 1: On=2s, Off=4s
Total Ring Length = 60s
Example 2: Distinctive Ring (short,short,short,long)
60(.2/.2,.2/.2,.2/.2,1/4)
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 60s
Number of Segments = 4
Segment 1: On=0.2s, Off=0.2s
Segment 2: On=0.2s, Off=0.2s
Segment 3: On=0.2s, Off=0.2s
Segment 4: On=1.0s, Off=4.0s
Total Ring Length = 60s
• FreqScript – A mini-script that specifics the frequency and level parameters of a tone. Up to 127
characters. Syntax: F
1
@L
1
[,F
2
@
L2
[,F
3
@L
3
[,F
4
@L
4
[,F
5
@L
5
[,F
6
@L
6
]]]]], where F
1
–F
6
are frequency
in Hz (unsigned integers only) and L
1
–L
6
are corresponding levels in dBm (with up to 1 decimal
places). White spaces before and after the comma are allowed (but not recommended)
Example 1: Call Waiting Tone
440@-10
Number of Frequencies = 1
Frequency 2 = 440 Hz at –10 dBm
Example 2: Dial Tone
350@-19,440@-19
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
33