Filter
Top Products
Ring8 Name Name in an INVITE’s Alert-Info Header to pick
distinctive ring/CWT 8 for the inbound call
Str31 Bellcore-r8
Cfwd Ring Splash
Len
2
Duration of ring splash when a call is forwarded
(0 – 10.0s)
Time3 0
Cblk Ring Splash
Len
2
Duration of ring splash when a call is blocked (0 –
10.0s)
Time3 0
VMWI Ring Splash
Len
Duration of ring splash when new messages arrive
before the VMWI signal is applied (0 – 10.0s)
Time3 .5
VMWI Ring Policy The parameter controls when a ring splash is played
when a the VM server sends a SIP NOTIFY message
to the PHONE ADAPTER indicating the status of the
subscriber’s mail box. 3 settings are available:
New VM Available – ring as long as there is 1 or more
unread voice mail
New VM Becomes Available – ring when the number
of unread voice mail changes from 0 to non-zero
New VM Arrives – ring when the number of unread
voice mail increases
Choice New VM
Available
Ring On No New VM If enabled, the PHONE ADAPTER will play a ring
splash when the VM server sends SIP NOTIFY
message to the PHONE ADAPTER indicating that
there are no more unread voice mails. Some
equipment requires a short ring to precede the FSK
signal to turn off VMWI lamp
Bool No
Notes:
1. Caller number patterns are matched from Ring 1 to Ring 8. The first match (not the closest
match) will be used for alerting the subscriber.
Parameter Name Description Type Default
Ring1 Cadence Cadence script for distinctive ring 1 CadScript 60(2/4)"
Ring2 Cadence Cadence script for distinctive ring 2 CadScript 60(.3/.2,
1/.2,.3/4)"
Ring3 Cadence Cadence script for distinctive ring 3 CadScript 60(.8/.4,.8/4)
Ring4 Cadence Cadence script for distinctive ring 4 CadScript 60(.4/.2,.3/.2,.8/4)
Ring5 Cadence Cadence script for distinctive ring 5 CadScript 60(.4/.2,.3/.2,.8/4)
Ring6 Cadence Cadence script for distinctive ring 6 CadScript 60(.4/.2,.3/.2,.8/4)
Ring7 Cadence Cadence script for distinctive ring 7 CadScript 60(.4/.2,.3/.2,.8/4)
Ring8 Cadence Cadence script for distinctive ring 8 CadScript 60(.4/.2,.3/.2,.8/4)
CWT 1 Cadence Cadence script for distinctive CWT
(Call Waiting Tone) 1
CadScript 30(.3/9.7)
CWT2 Cadence Cadence script for distinctive CWT 2 CadScript 30(.1/.1, .1/9.7)"
CWT3 Cadence Cadence script for distinctive CWT 3 CadScript 30(.1/.1, .1/.1,
.1/9.5)
CWT4 Cadence Cadence script for distinctive CWT 4 CadScript 30(.1/.1, .3/.1,
.1/9.3)
CWT5 Cadence Cadence script for distinctive CWT 5 CadScript 30(.3/.1,.1/.1,.3/9.
1)
CWT6 Cadence Cadence script for distinctive CWT 6 CadScript 30(.1/.1, .3/.1,
.1/9.3)
CWT7 Cadence Cadence script for distinctive CWT 7 CadScript 30(.1/.1, .3/.1,
.1/9.3)
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
68