Filter
Top Products
Protect IVR Factory
Reset
Bool No
Admin Password The password for administrator Str63
User Password The password for User Str63
4.3. Basic Networking Configuration
Configuration parameters in this list are used for setting up basic network connectivity. In general,
many of these parameters are set automatically (for example, using DHCP) or are configured by the
end user of the device.
Note that the RT31P2 ignores the following parameters: DHCP, Static_IP, NetMask, and Gateway.
Other than the DNS_Server_Order and DNS_Query_Mode, the rest these parameters also can be
configured from the RT31P2 User GUI.
Network Configuration
Parameter Name Description Type Default
DHCP Enable/Disable DHCP Bool Yes
Host Name Host Name of PHONE ADAPTER Str31
Domain The network domain of PHONE ADAPTER Str127
Static IP Static IP address of PHONE ADAPTER, which will take
effect if DHCP is disabled
IP 0.0.0.0
NetMask The NetMask used by PHONE ADAPTER when DHCP
is disabled
IP 255.255.255.
0
Gateway The default gateway used by PHONE ADAPTER when
DHCP is disabled
IP 0.0.0.0
Primary DNS DNS server used by PHONE ADAPTER in addition to
DHCP supplied DNS servers if DHCP is enabled; when
DHCP is disabled, this will be the primary DNS server.
IP 0.0.0.0
Secondary DNS DNS server used by PHONE ADAPTER in addition to
DHCP supplied DNS servers if DHCP is enabled; when
DHCP is disabled, this will be the secondary DNS
server.
IP 0.0.0.0
DNS Query Mode Do parallel or sequential DNS Query Choice Parallel
Syslog Server Specify the Syslog server name and port. This feature
specifies the server for logging PHONE ADAPTER
system information and critical events.
FQDN
Debug Server The debug server name and port. This feature
specifies the server for logging PHONE ADAPTER
debug information. The level of detailed output
depends on the debug level parameter setting.
FQDN
Debug Level The higher the debug level, the more debug
information will be generated. Zero (0) means no
debug information will be generated.
Choice 0
Primary NTP
Server
IP address or name of primary NTP server. Str127
or IP
Secondary NTP
Server
IP address or name of secondary NTP server Str127
or IP
Notes:
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
47