Filter
Top Products
alerting them to the second call. The person
calling will hear normal ringing.
User Action Required to Deactivate or End See Cancel Call Waiting.
5.7. Disable or Cancel Call Waiting
Service Description The PHONE ADAPTER supports disabling of
call waiting permanently or on a per call basis.
User Action Required to Activate or Use To temporarily disable Call Waiting (for the
length of one call):
Before placing a call:
Lift Receiver
Press *__
Listen for dial tone then dial the number you
want to call.
Call Waiting is now disabled for the duration of
this call only.
To deactivate Call Waiting while on a call:
Press the switch hook or flash button briefly.
This puts the first call on hold.
Listen for three short tones and then a dial
tone.
Press *__
Listen for dial tone then return to your call by
pressing the switch hook or flash button. Call
Waiting is now disabled for the duration of this
call.
To deactivate Call Waiting while on a
permanent basis (until cancelled):
Lift the receiver
Listen for dial tone
Press *__
You will hear a confirmation tone signaling your
request to cancel Call Waiting has been
accepted.
Expected Call and Network Behavior Callers who dial your number will receive a
busy signal or, if available, the caller will be
forwarded to voice mail or another
predetermined forwarding number.
User Action Required to Deactivate or End If you have cancelled Call Waiting temporarily,
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
82