Cisco Systems Linksys PAP2 Telephone Accessories User Manual


 
Secure_Call_Setting[1] "No" ;
# *** Distinctive Ring Settings
Ring1_Caller[1] ! "" ;
! "" ;
ng3_Caller[1] ! "" ;
ng7_Caller[1] ! "" ;
! "" ;
# options: 1/2/3/4/5/6/7/8
options: 1/2/3/4/5/6/7/8
lk_Ring_Splash_Len[1] ! "0" ;
! ".5" ;
WI_Ring_Policy[1] "New VM Available" ; # options: New VM
M Arrives
***
ne_Enable[2] "Yes" ;
FY" ;
T_Keep_Alive_Dest[2] "$PROXY" ;
*** Network Settings
;
; # options: low/medium/high/very high
P_Port[2] "5061" ;
T_SIP_Port[2] "" ;
# options: none/1-line/1-line excl.
line excl. OPT|NTFY|REG/full/full excl.
xcl. OPT|NTFY|REG
Ring2_Caller[1]
Ri
Ring4_Caller[1] ! "" ;
Ring5_Caller[1] ! "" ;
Ring6_Caller[1] ! "" ;
Ri
Ring8_Caller[1]
# *** Ring Settings
Default_Ring[1] ! "1" ;
Default_CWT[1] ! "1" ; #
Hold_Reminder_Ring[1] ! "8" ; # options: 1/2/3/4/5/6/7/8/none
Call_Back_Ring[1] ! "7" ; # options: 1/2/3/4/5/6/7/8
Cfwd_Ring_Splash_Len[1] ! "0" ;
Cb
VMWI_Ring_Splash_Len[1]
VM
Available/New VM Becomes Available/New V
Ring_On_No_New_VM[1] "No" ;
#
Li
# *** Streaming Audio Server (SAS)
SAS_Enable[2] "No" ;
SAS_DLG_Refresh_Intvl[2] "30" ;
SAS_Inbound_RTP_Sink[2] "" ;
# *** NAT Settings
NAT_Mapping_Enable[2] "No" ;
NAT_Keep_Alive_Enable[2] "No" ;
NAT_Keep_Alive_Msg[2] "$NOTI
NA
#
SIP_TOS/DiffServ_Value[2] "0x68"
Network_Jitter_Level[2] "high"
RTP_TOS/DiffServ_Value[2] "0xb8" ;
# *** SIP Settings
SI
SIP_100REL_Enable[2] "No" ;
EX
Auth_Resync-Reboot[2] "Yes" ;
SIP_Debug_Option[2] "none" ;
OPT/1-line excl. NTFY/1-line excl. REG/1-
OPT/full excl. NTFY/full excl. REG/full e
# *** Call Feature Settings
Blind_Attn-Xfer_Enable[2] "No" ;
MOH_Server[2] "" ;
Xfer_When_Hangup_Conf[2] "Yes" ;
# *** Proxy and Registration
Proxy[2] "" ;
Use_Outbound_Proxy[2] "No" ;
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
108