Cisco Systems Linksys PAP2 Telephone Accessories User Manual


 
CWT8_Cadence "2.3(.3/2
)" ;
-r1" ;
-r2" ;
-r3" ;
-r4" ;
-r5" ;
-r6" ;
-r7" ;
Ring8_Name "Bellcore-r8" ;
# *** Ring and Call Waiting Tone Spec
Ring_Waveform "Sinusoid" ; # options: Sinusoid/Trapezoid
Ring_Frequency "25" ;
Ring_Voltage "70" ;
CWT_Frequency "440@-10" ;
# *** Control Timer Values (sec)
Hook_Flash_Timer_Min ".1" ;
Hook_Flash_Timer_Max ".9" ;
Callee_On_Hook_Delay "0" ;
Reorder_Delay "5" ;
Call_Back_Expires "1800" ;
Call_Back_Retry_Intvl "30" ;
Call_Back_Delay ".5" ;
VMWI_Refresh_Intvl "30" ;
Interdigit_Long_Timer "10" ;
Interdigit_Short_Timer "3" ;
CPC_Delay "2" ;
CPC_Duration "0" ;
# *** Vertical Service Activation Codes
Call_Return_Code "*69" ;
Blind_Transfer_Code "*98" ;
Call_Back_Act_Code "*66" ;
Call_Back_Deact_Code "*86" ;
Cfwd_All_Act_Code "*72" ;
Cfwd_All_Deact_Code "*73" ;
Cfwd_Busy_Act_Code "*90" ;
Cfwd_Busy_Deact_Code "*91" ;
Cfwd_No_Ans_Act_Code "*92" ;
Cfwd_No_Ans_Deact_Code "*93" ;
Cfwd_Last_Act_Code "*63" ;
Cfwd_Last_Deact_Code "*83" ;
Block_Last_Act_Code "*60" ;
Block_Last_Deact_Code "*80" ;
Accept_Last_Act_Code "*64" ;
Accept_Last_Deact_Code "*84" ;
CW_Act_Code "*56" ;
CW_Deact_Code "*57" ;
CW_Per_Call_Act_Code "*71" ;
CW_Per_Call_Deact_Code "*70" ;
Block_CID_Act_Code "*67" ;
Block_CID_Deact_Code "*68" ;
Block_CID_Per_Call_Act_Code "*81" ;
Block_CID_Per_Call_Deact_Code "*82" ;
Block_ANC_Act_Code "*77" ;
Block_ANC_Deact_Code "*87" ;
DND_Act_Code "*78" ;
DND_Deact_Code "*79" ;
CID_Act_Code "*65" ;
CID_Deact_Code "*85" ;
CWCID_Act_Code "*25" ;
CWCID_Deact_Code "*45" ;
# *** Distinctive Ring/CWT Pattern Names
Ring1_Name "Bellcore
Ring2_Name "Bellcore
Ring3_Name "Bellcore
Ring4_Name "Bellcore
Ring5_Name "Bellcore
Ring6_Name "Bellcore
Ring7_Name "Bellcore
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
112