Cisco Systems Linksys PAP2 Telephone Accessories User Manual


 
PHONE ADAPTER.
Set Network Mask
121
Enter value using
numbers on the
telephone key pad.
Use the * (star) key
when entering a
decimal point.
DHCP must be “Disabled”
otherwise you will hear,
“Invalid Option,” if you try
to set this value.
Requires Password
Check Static Gateway IP
Address
130
None IVR will announce the
current gateway IP
address of PHONE
ADAPTER.
Set Static Gateway IP
Address
131
Enter IP address
using numbers on
the telephone key
pad. Use the *
(star) key when
entering a decimal
point.
DHCP must be “Disabled”
otherwise you will hear,
“Invalid Option,” if you try
to set this value.
Requires Password
Check MAC Address
140
None IVR will announce the
MAC address of PHONE
ADAPTER in hex string
format.
Check Firmware Version
150
None IVR will announce the
version of the firmware
running on the PHONE
ADAPTER.
Check Primary DNS
Server Setting
160
None
IVR will announce the
current setting in the
Primary DNS field.
Set Primary DNS Server
161
Enter IP address
using numbers on
the telephone key
pad. Use the *
(star) key when
entering a decimal
point.
Requires Password
Check PHONE
ADAPTER’s Web Server
Port
170
None
IVR will announce the
port that the web server
is listening on. (Default is
80)
Enable/Disable Web
Server of PHONE
ADAPTER
7932
Enter 1 to enable
Enter 0 to disable
Requires Password
Manual Reboot of Unit
732668
None After you hear “Option
Successful,” hang-up. Unit
will reboot automatically.
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
31