Filter
Top Products
User Factory Reset of Unit
WARNING:
ALL “User-Changeable” NON-
DEFAULT SETTINGS WILL BE
LOST!
This might include network and
service provider data.
877778
Enter 1 to confirm
Enter *(star) to
cancel operation
PHONE ADAPTER will
prompt for confirmation.
After confirming, you will
hear “Option Successful.”
Hang-up. Unit will reboot
and all “User Changeable”
configuration parameters
will be reset to factory
default values.
Factory Reset of Unit
WARNING:
ALL NON-DEFAULT SETTINGS
WILL BE LOST!
This includes network and
service provider data.
73738
Enter 1 to confirm
Enter * (star) to
cancel operation
PHONE ADAPTER will
prompt for confirmation.
After confirming, you will
hear “Option Successful.”
Hang-up. Unit will reboot
and all configuration
parameters will be reset to
factory default values.
Note: If the Administrator password is not set or the user is allowed to change it, the items marked
with “Requires Password” will not require a password.
4. Configuration Parameters
4.1. Data Types
The data types for the PHONE ADAPTER configuration parameters are described below.
• Uns<n> – Unsigned n-bit value, where n = 8, 16, or 32. It can be specified in decimal or hex
format such as 12 or 0x18 as long as the value can fit into n bits.
• Sig<n> – Signed n-bit value. It can be specified in decimal or hex format. Negative values must
be preceded by a “-“ sign. A ‘+’ sign before positive value is optional
• Str<n> – A generic string with up to n non-reserved characters.
• Float<n> – A floating point value with up to n decimal places.
• Time<n> – Time duration in seconds, with up to n decimal places. Extra decimal places specified
are ignored.
• PwrLevel – Power level expressed in dBm with 1 decimal place, such as –13.5 or 1.5 (dBm)
• Bool: Boolean value of either “yes” or “no”
• {a,b,c,…} – A choice among a, b, c, …
• IP – IP Address in the form of x.x.x.x, where x between 0 and 255. For example 10.1.2.100
• Port – TCP/UDP Port number (0-65535). It can be specified in decimal of hex format.
• UserID – User ID as appeared in a URL; up to 63 characters
• FQDN – Fully Qualified Domain Name, such as “sip.Linksys.com:5060”, or “109.12.14.12:12345”.
It can contain up to 63 characters
• Phone – A phone number string, such as 14081234567, *69, *72, 345678, or a generic URL such
as
1234@10.10.10.100:5068, or jsmith@Linksys.com. It can contain up to 39 characters.
• ActCode – Activation code for a supplementary service, such as *69. It can contain up to 7
characters.
• PhTmplt – A phone number template. Each template may contain 1 or more patterns separated
by a “,”. White Phone Adapterce at the beginning of each pattern is ignored. “?” and “*” represent
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
32