Filter
Top Products
Within this directory, the Apache module mod_ssl verifies the client certificate, and verifies that the
MAC address in the certificate corresponds the configuration file it is requesting. Either this directory
must contain a configuration file, or a CGI application needs to generate the appropriate config file if
that MAC address is configured in your system. (The Apache web server is freely available at
http://www.apache.org ).
Once an initial XML configuration file is downloaded from the provider web server, subsequent
configuration can be downloaded from the same server. Alternatively, the individual configuration
files can be encrypted using AES 256-bit encryption as described previously, using a key that was
conveyed in the initial configuration file. These encrypted configuration files then can be downloaded
safely using HTTP or TFTP.
Linksys recommends using an encrypted configuration file. In the unlikely event that the private key of
a terminal adapter or the Linksys certificate authority is compromised, terminal adapters which have
already enrolled with a provider and use an encrypted configuration file would be unaffected by such
a compromise.
3.3. Web Interface
The PHONE ADAPTER provides a built-in web server. Configuration and administration can be
performed through this convenient web interface.
3.3.1. Web Interface Conventions
The PHONE ADAPTER line uses the following conventions with the web administration capabilities:
o The PHONE ADAPTER web administration supports two privilege levels: Administrator and
User. To use the User privilege, simply point a web browser at the IP address of the PHONE
ADAPTER; to use the administrator privilege, use this URL for the PAP2
http://IP_Address_Of_PHONE ADAPTER/admin/, and this URL for the RT31P2:
http://IP_Address_Of_PHONE ADAPTER/Voice_adminPage.htm . The default IP address for
the LAN interface of the RT31P2 is 192.168.15.1. See the next section for more information
about administration privileges.
o The PHONE ADAPTER supports Internet Explorer 5.5 and above and Netscape 7.0 and
above.
o The web configuration pages can be password protected. See 3.3.2 for more information
about password protect.
o The user name of web Administrator is : admin
o The user name of web User is : user
o Note: The user names for both administrator and User are fixed and cannot be changed.
o After making changes to PHONE ADAPTER configuration parameters, pressing “Submit All
Changes” button will apply all the changes and if necessary, automatically reboot the device.
Multiple changes may be made on multiple page tabs of the web interface at the same time.
Pressing “Submit All Changes” will apply all the modifications.
Important Note: switching between page tabs won’t apply the changes to PHONE
ADAPTER, The only way to apply the changes is to press the “Submit All Changes” button.
o If the “Undo All Changes” button is clicked, any modifications to profile parameters on any and
all pages will be reset back to their original values before modification.
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
26