Filter
Top Products
Using the User Options Web Pages
Cisco Unified IP Phone Guide for Cisco Unified Communications Manager 8.5(1) (SCCP and SIP) 79
Setting Up Phones and Access Lists for Mobile Connect
When using Mobile Connect, you must add your mobile and other phones that you want to use to
make and receive calls using the same directory numbers as your desk phone. These phones are called
remote destinations. You can also define access lists to restrict or allow calls from certain numbers to
be sent to your mobile phone.
If you want to... Then do this after you log in...
Create an access list 1. Choose User Options > Mobility Settings > Access Lists.
2. Click Add New.
3. Enter a name to identify the access list and a description (optional).
4. Choose if the access list will allow or block specified calls.
5. Click Save.
6. Click Add Member to add phone numbers or filters to the list.
7. Select an option from the Filter Mask drop-down list box. You can filter
a directory number, calls with restricted caller ID (Not Available), or calls
with anonymous caller ID (Private).
8. If you select a directory number from the Filter Mask drop-down list
box, enter a phone number or filter in the DN Mask field. You can use
the following wild cards to define a filter:
–
X (upper or lower case)—Matches a single digit. For example,
408555123X matches any number between 4085551230
and
4085551239.
–
!—Matches any number of digits. For example, 408! matches any
number starts with 408.
–
#—Used as a single digit for exact match.
9. To add this member to the access list, click Save.
10. To save the access list, click Save.