Filter
Top Products
Cisco Unified IP Phone Guide for Cisco Unified Communications Manager 8.5(1) (SCCP and SIP) 59
Changing Phone Settings
You can personalize your Cisco Unified IP Phone by adjusting the ring tone, background image, and
other settings.
Customizing Rings and Message Indicators
You can customize how your phone indicates an incoming call and a new voice mail message. You can
also adjust the ringer volume for your phone.
If you want to... Then...
Change the ring tone
per
line
1. Choose > User Preferences > Rings.
2. Choose a phone line or the default ring setting.
3. Choose a ring tone to play a sample of it.
4. Press Select and Save to set the ring tone, or press Cancel.
Adjust the volume level for
the phone ringer
Press while the handset is in the cradle and the headset
and speakerphone buttons are off. The new ringer volume is saved
automatically.
Note Check with your system administrator to see if a minimum
ringer-volume setting was configured.
Change the ring pattern per
line (flash-only, ring once,
beep-only, etc.)
1. Log in to your Cisco Unified CM User Options web pages. (See
Accessing Your User Options Web Pages, page 71.)
2. Access your call ring pattern settings. (See Controlling Line
Settings on the Web, page 77.)
Note Before you can access this setting, your system administrator may
need to enable it for you.