Filter
Top Products
6 OL-22332-01
Removing the Hookswitch Clip (Required)
Some phones ship with a clip to secure the hookswitch. Before you use your phone, remove the
hookswitch clip (if present) from the cradle area. With the clip removed, the hookswitch lifts slightly
when you pick up the handset.
Adjusting the Handset Rest (Optional)
Cisco recommends adjusting the handset rest, particularly when wall-mounting the phones, as this will
ensure that the receiver will not readily slip out of the cradle. See the table below for instructions.
5
Access port
6
Handset port
7
Headset port
8
Footstand button
9
Auxiliary port
1
Set the handset aside and pull the square plastic tab from the handset rest.
2
Rotate the tab 180 degrees.
3
Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab.
Return the handset to the handset rest.
185165
1 2 3
77354