Filter
Top Products
15
Bluetooth
Glossary of terms
Below are some terms used in this user’s manual to help you become
familiar with using your Bluetooth devices and your new AT&T
telephone system.
Active devices - Bluetooth enabled devices that are paired to the telephone
base and on the active devices list. A maximum of two paired devices (two
cell phones, or one cell phone and one headset) on the active devices list
can be connected to the telephone base, but only one can be on a call at
a time.
Bluetooth cell phone - refers to a mobile Bluetooth enabled
cellular telephone.
CELLULAR line - the telephone line associated with your cell phone service.
On your TL86109, press CELL on the handset or CELLULAR on the base
to use the cell line.
Connected - a Bluetooth enabled device (cell phone or headset) can only be
used when it is connected to the telephone base. When a Bluetooth enabled
device is connected to the telephone base and listed on the active devices
list, it is ready for use.
Device list - The list of devices connected to the telephone.
Disconnected - a diagonal line appears across devices A and/or B when the
corresponding Bluetooth enabled device is disconnected from the
telephone base.
Discoverable mode - before a Bluetooth enabled device can be paired, it
must be set to this mode. When pairing your cell phone, the telephone base
is set to this mode. Depending on the cell phone manufacturer, this mode is
sometimes referred to as Find Me or Visibility.
1 LINE and 2 LINE - your conventional telephone land lines. On your
TL86109, press 1 LINE/FLASH or 2 LINE/FLASH on the handset or 1 LINE or
2 LINE on the base to use the corresponding line.
Paired devices - Bluetooth enabled devices (cell phones or headsets) that
have shared registration information with the telephone base. A total of four
Bluetooth enabled devices can be paired to the telephone base. However,
only two paired devices can communicate with the base at a time.
Pairing - sometimes referred to as bonding. The process of sharing
registration information between two Bluetooth enabled devices. Your
Bluetooth enabled cell phone or headset must first be paired to the
telephone base in order to use it with this telephone system.
PIN - by default, the PIN is 0000 for the telephone base and for most
Bluetooth devices. PIN information must be exchanged between Bluetooth
devices before they can be used. This is also known as a Passkey
or Passcode.