Filter
Top Products
60
Telephone settings
Answering system settings
Using the telephone base:
Press /ON/OFF LINE 1 or /ON/OFF LINE 2 to
turn on the corresponding answering system. The
telephone base announces, “Calls will be answered.”
The corresponding light turns on.
Press /ON/OFF LINE 1 or /ON/OFF LINE 2 to turn
off the corresponding answering system. The telephone
base announces, “Calls will not be answered.” The
corresponding light turns off.
-OR-
Press the MENU softkey on the telephone base in idle
mode to enter the main menu.
Press
DIR, CID, /DELETE or
/REC
to scroll
to Answering sys, then press the SELECT softkey.
Press
DIR, CID, /DELETE or
/REC
to
choose Mailbox 1 or Mailbox 2, then press the
SELECT softkey.
Press
DIR, CID, /DELETE or
/REC
to
highlight Answer ON/OFF, then press the
SELECT softkey.
Press
DIR, CID, /DELETE or
/REC
to
choose On or Off, then press the SET softkey to
confirm. You hear a confirmation tone.
NOTES:
If there is no remaining recording time, the answering system announces, “Memory is
full“ and it turns off and cannot be turned back on.
If the total recording time is less than three minutes, the answering system announces,
“Less than three minutes to record,” and your handset and telephone base display
Ans sys low.
If the answering system is off, you may press /ON/OFF LINE 1 or /ON/OFF LINE 2
on the telephone base to turn on the corresponding answering system during an incoming
call. The corresponding answering system answers the call immediately
.
•
•
1.
2.
3.
4.
5.
•
•
•
ANSWERING SYS
Mailbox 1
Mailbox 2
SELECT
MAILBOX 1
Delete all old
Record memo
Answer ON/OFF
SELECT
ANSWER ON/OFF
On
Off
SET