Filter
Top Products
12
Getting started
Battery charging
Once you have installed the battery, the screen indicates the battery status
(see table below). If necessary, place the handset in the charger to charge
the battery. For best performance, keep the handset in the charger when not
in use. The battery is fully charged after 16 hours of continuous charging. See
the table on page 157 for battery operating times.
If the screen shows Low battery, you need to charge the battery without
interruption for at least 25 minutes to give the handset enough charge to use
the telephone for a short time. The following table summarizes the battery
charge indicators and actions to take.
Battery indicators Battery status Action
The screen is blank or shows
Place in charger.
The battery has no or very
little charge. The handset
cannot be used.
Charge without interruption
until the screen shows
Low battery or HANDSET X
(at least 25 minutes).
The screen shows
Low battery and flashes.
Battery has enough charge to
be used for a short time.
Charge without interruption
until the screen shows
HANDSET X (at least 25
minutes).
The screen shows
HANDSET X.
Battery is charged. To keep the battery charged,
place it in the charger when
not in use.
NOTE: If you are on a phone call in low battery mode, you hear four short beeps
every minute.