Filter
Top Products
63
Telephone settings
Answering system settings
Remote access code
A two-digit security code is required to access the answering system
remotely from any touch-tone telephone. The preset code is 19. You can
change the code to any number from 00 to 99. Once you set the remote
access code, the answering system automatically turns on.
To change the remote code:
Using a cordless handset:
Press the MENU softkey on the handset in idle mode to
enter the main menu.
Press or to scroll to ANSWERING SYS, then press
the SELECT softkey.
Press or to choose Mailbox 1 or Mailbox 2, then
press the SELECT softkey.
Press or to highlight Ans sys setup, then press the
SELECT softkey.
Press or to highlight Remote code, then press the
SELECT softkey.
Use the dialing keys (0-9) to enter a two-digit number
from 00-99.
Press OFF/CLEAR to erase a digit.
Press to move the cursor to the right or to the left.
Press the SET softkey to confirm.
Using the telephone base:
Press the MENU softkey on the telephone base in idle
mode to enter the main menu.
Press DIR, CID, /DELETE or
/REC
to scroll to
Answering sys, then press the SELECT softkey.
Press DIR, CID, /DELETE or
/REC
to choose
Mailbox 1 or Mailbox 2, then press the SELECT softkey.
Press DIR, CID, /DELETE or
/REC
to highlight
Ans sys setup, then press the SELECT softkey.
Press DIR, CID, /DELETE or
/REC
to highlight
Remote code, then press the SELECT softkey.
Use the dialing keys (0-9) to enter a two-digit number
from 00-99.
Press CANCEL to erase a digit.
Press DIR or /SKIP to move the cursor to the
right. Press CID or /REPEAT to move to the left.
Press the SET softkey to confirm.
1.
2.
3.
4.
5.
6.
•
•
7.
1.
2.
3.
4.
5.
6.
•
•
7.
ANSWERING SYS
Mailbox 1
Mailbox 2
BACK SELECT
REMOTE CODE
19
BACK SET
MAILBOX 1
Record memo
Answer On/Off
Ans sys setup
BACK SELECT
REMOTE CODE
On
19
RECORD SET
MAILBOX 1
Record memo
Answer On/Off
Ans sys setup
SELECT
ANSWERING SYS
Mailbox 1
Mailbox 2
SELECT
ANS SYS SETUP
# of rings
Remote code
Msg alert tone
BACK SELECT
ANS SYS SETUP
Call screening
# of rings
Remote code
REC SELECT