Filter
Top Products
11
Getting started
Battery installation and charging
Install the battery as shown below.
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model BT166342.
To order, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
If you do not use the handset for a long time, disconnect and remove the battery to prevent
possible leakage.
•
•
To replace the battery, press the tab and slide the
battery compartment cover downwards. Lift out the old
battery and disconnect it from the handset. Follow the
instructions above to install and charge the new battery.
Step 3
Charge the handset by
placing it face up in the
charger. The CHARGE
light is on when
charging.
Step 1
Plug the battery
connector securely
into the socket inside
the handset battery
compartment, matching
the color-coded label.
Insert the supplied
battery with the label
THIS SIDE UP facing up
as indicated.
Step 2
Align the cover flat
against the battery
compartment, then
slide it upwards until
it clicks into place.
CHARGE light
SET DATE
--/--/--
MM/DD/YY
SET
SET TIME
--:-- --
SET
After you install your telephone, the handset will prompt
you to set the date and time. For instructions, see
Set date/time on page 37. To skip setting the date and
time, press OFF/CLEAR.