Filter
Top Products
68
Telephone operation
Make, answer and end a call
Call waiting on line 1 or line 2 call
If you subscribe to call waiting service from your telephone service provider,
you hear a beep if someone calls while you are already on a call.
Press the corresponding line button, 1 LINE/FLASH or 2 LINE/FLASH, on the
handset, or FLASH on the telephone base to put your current call on hold
and take the new call.
Press the corresponding line button, 1 LINE/FLASH or 2 LINE/FLASH, on the
handset, or FLASH on the telephone base at any time to switch back and
forth between calls.
Make, answer or end a cell call
You can connect a maximum of two Bluetooth enabled cell phones to the
telephone base, but only one cell phone can be used on a cell call at a time.
The TL86109 can be used to make or answer calls on the cell phone line.
Using a cordless handset:
To make a cell call:
Press CELL, then enter the telephone number.
Press the DIAL softkey.
To predial a cell call:
Enter the telephone number, then press CELL.
If you have only one cell phone connected to the telephone base, it is
automatically selected to make cell calls. If you have two cell phones
connected to the telephone base, the telephone system prompts you to
select a cell phone before you make a cell call.
To answer a cell call:
Press CELL.
To end a cell call:
Press OFF/CLEAR or put the handset in the charger.
NOTES:
You can also use your cell phone to answer the call. If you answer with your cell phone,
it disconnects from the telephone base.
If you do not want to answer the call, press the REJECT softkey.
When you try to make a cell call but your cell phone is not connected to the base, the
cordless handset displays Cellular phone not connected. Press the CONNECT softkey
to connect your cell phone to the telephone system. Refer to Pair a cell phone on
pages 16-17 and Connect/disconnect an active device on page 23.
•
•
1.
2.
•
•
•
•
•
•