Filter
Top Products
ASSIGNING PERSONAL SPEED DIAL CODES TO 5- AND 10-BUTTON VOICE
TERMINALS AND BASIC TELEPHONES
On 5- and 10-button voice terminals, you can program Personal Speed Dial codes
instead of Outside Auto Dial buttons for frequently used numbers. You can also give
basic telephones this capability, but only if you use Centralized Voice Terminal Pro-
gramming. Use Centralized
Voice Terminal Programming or follow the procedure
below to program
Personal
Speed Dial codes.
1. Go to the voice terminal you want to program.
2.
Slide the T/P switch on the left side of the voice terminal to
P.
The voice terminal rings every 5 seconds to remind you it is in program
mode.
3. Dial the 3-character code you want to assign to the telephone number
(available codes are #01 through #22).
4. Dial *90.
5. Dial the telephone number (16-digit maximum). You can include the
following special characters:
Hold
(Pause) for a pause,
Drop
(Stop) for
a stop,
Transfer
for Touch-Tone Enable, and
Recall
for a switchhook
flash.
6. Make a list of all Personal Speed Dial code numbers and the telephone
numbers they represent.
7.
If you have more Personal Speed Dial numbers to assign to this voice
terminal, you can do so. Otherwise, slide the T/P switch to the center
position to return to normal operation.
77