Filter
Top Products
Small Administrator/Attendant
Console* in Administration Mode
1.
You set the T/P switch to P to perform system
administration.
2.
You use
Adm Tel
when assigning lines to voice ter-
minals and assigning voice terminals Dial Access to
Line Pools.
3.
You use
Adm Pool
when setting up line pools.
4.
Line buttons.
5.
Auto Intercom buttons (10 through 29).
6.
You use
Adm Misc
when specifying Touch-Tone or
rotary dialing, assigning allowed-list call restrictions,
and administering other system options.
7.
You use
Night Service
when assigning lines to ac-
tivate extra-alerting devices when the attendant is off
duty.
8.
You use
Copy
to give a voice terminal the same
assignments as one that has already been set up.
9.
You use
Call Rstr
when setting lines to detect a toll
prefix or area code only and when assigning outward
and toil call restrictions to voice terminals.
* For systems with 8 or fewer lines and with 20 or fewer voice terminals—switch
H
on control unit is up.
10