Filter
Top Products
Large Administrator/Attendant
Console* in Administration Mode
The large console provides the same features as the small console, but
it
has more line and Auto Intercom buttons.
1.
2.
3.
4.
5.
6.
7.
8.
9.
You set the T/P switch to P to perform system
administration.
10.
You use
Adm Tel
when assigning lines to voice ter-
minals and assigning voice terminals Dial Access to
11.
Line Pools.
You use
Adm Pool
when setting up line pools.
12.
Line buttons.
Auto Intercom buttons (10 through 79).
13.
Buttons in this column represent intercom numbers
10-19,40-49, or 70-79, depending on which Shift but-
ton you touch.
14.
Buttons in this column represent intercom numbers
20-29 or 50-59, depending on which Shift button you
touch.
15.
Buttons in this column represent intercom numbers
30-39 or 60-69, depending on which Shift button you
touch.
16.
You use this Shift button to use Auto Intercom but-
tons for intercom numbers 10-39.
You use this Shift button to use Auto Intercom but-
tons for intercom numbers 40-69.
You use this Shift button to use Auto Intercom but-
tons for intercom numbers 70-79.
You use
Night Service
when assigning lines to ac-
tivate extra-alerting devices when the attendant is off
duty.
You use
Adm Mist
when specifying Touch-Tone or
rotary dialing, assigning allowed-list call restrictions,
and administering other system options.
You don’t use
Message Status
during system ad-
ministration. The light beside Message Status must
be off during administration.
You use
Copy
to give a voice terminal the same
assignments as one that has already been set up.
You use
Call Rstr
when setting lines to detect atoll
prefix or area code only and when assigning outward
and toll call restrictions to voice terminals.
* For systems with more than 8 lines or more than 20 voice terminals—switch H on control unit is down.
11