AT&T CL83201 Cordless Telephone User Manual


 
Multiple handset use
43
Push-to-talk (PTT)
PTT call to a single device
Using a cordless handset:
1. There are a few ways to begin a PTT call to a single device.
When the handset is not in use:
If you have one handset, press and hold PUSH TO TAL�.
If you have more than one handset:
w Press PUSH TO TAL� on the handset. Then use the
dialing keys to enter the destination device number.
-OR-
w Press PUSH TO TAL� on the handset. Press qCID or
pDIR to highlight the destination device number. Then
press MENU/SELECT or PUSH TO TAL�.
The handset shows Connecting to HANDSET X...
(HANDSET represents the handset name, X represents the
destination handset number) or Connecting to BASE 0...
(BASE represents the base name)
for a few seconds. When
the connection is made, both your and the destination
device screens display Press and hold [PTT] to talk.
2. Press and hold PUSH TO TAL�. A chirp indicates your
microphone is on. Speak towards the device. Your voice is
broadcast to the destination device.
While you are speaking, your handset shows
PTT To handset: X or PTT To base.
3. Release PUSH TO TAL� after speaking. Both devices beep once again and
the screens show Press and hold [PTT] to talk. Then you can
press and hold PUSH TO TAL� to continue speaking or the destination
device can respond (see Answer a PTT call on page 46).
4. To end the PTT call, press OFF/CANCEL or place the handset in the
telephone base or charger. The handset shows Push to talk Ended for a
few seconds.
PTT To
handset: X
PUSH TO TALK
>Handset X
p
q
Connecting to
Handset X...
p
q
Press and hold
[PTT] to talk