Filter
Top Products
Telephone settings
24
Telephone base settings
Rename base
You can create a new name for the telephone base.
1. When the telephone is idle, press MENU/SELECT.
2. Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to >Rename base, then
press MENU/SELECT.
4. Change the telephone base name when prompted.
Press qCID or pDIR to move the cursor to the left
or right.
Use the dialing keys to enter a name (up to 11
characters). Each time you press a key, a character on that key appears.
Additional key presses produce other characters on that key. See the
chart on page 51.
Press X/DELETE to backspace and delete a character.
Press and hold X/DELETE to delete all characters.
5. Press MENU/SELECT to save the setting and return to the previous menu.
There is a confirmation tone.
�ey tone
The telephone base is set to beep with each key press. You can adjust the
key tone volume or turn it off. If you turn off the key tone, there are no
beeps when you press keys.
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to >�ey tone, then press
MENU/SELECT.
4. Use qCID or pDIR to select the desired volume
or Off.
5. Press MENU/SELECT to save your preference. There is a confirmation tone
and the screen returns to the previous menu.
•
•
•
•
Rename base
>
Key tone
p
q
KEY TONE
p
q
Clr voicemail
>
Rename base
p
q
RENAME BASE
BASE_______