Toshiba VP 300 Answering Machine User Manual


 
LOCATION
Tath
14-5
14.2
LOCATION TABLE FOR REMOTE NETWORKING
Remote Networking refers to situations where Toshiba VP Systems re located at different
locations behind different phone systems. Remote networking requires the optional SW-X0004.
The LOCATION Table for remote networking contains the name of each location on the network,
the route choices to access it, whether the location has a
lbshiba
VP System, if it ti,,on the same
PBX, and the public or TIE network numbers required to access each location.
Example of a LocATION Table:
m
The
Tmhiba VP System can process a call to a location without a Toshrba VP System. If
the remote location has a PBX of the same type as the one placing the call, the Toshiba VP
System waits for answer detection to ensure that the call is successfully completed. In the
above example, AtIanta is a location for a site without a Toshiba VP System.
B
How The LOCATION Table Is Used
The LOCATION Table specifies the route choices and the public or TIE line numbers to use
to call the
Toshiba
VP System at other locations.
n
How to Configure the LOCATION Table
A maximum of 498 locations may be
defmed
in the LOCATION Table.
LOCATION NAME Descriptive name to identify each location on the network.
ROUTE CHOICES Name of the routes used to access the location. Up to three
route choices may be defined for each location.