Toshiba VP 300 Answering Machine User Manual


 
6.4
HOW TO CObJFlGURE THE CSTAT TABLE FOR THE PDL INDEX
VALUE
The PDL index value is the first entry in the CSTAT Table. It is automatically defined with a.
default Personal Distribution List index value of NONE for each mailbox COS defmed in the
Toshba VP System configumtion. This index value does not apply to port/trunk COS.
l
Use the UPDATE program to modify the PDL index value for a mailbox COS. .
ENTRY R
The only entry in the CSTAT Table is the PDL index value. It is entry
?#l.
- _
PDL INDEX VALUE
The index value for a COS represents the maximum number of PDL
members, if any, allocated for each mailbox in that COS. Validindex
values are shown in the chart in the previous section of this chapter.
[D If a mailbox has a COS with a non-zero PDL value and has PDLS
d&med, then that mailbox is moved to a COS with a zero PDL
value, the defied PDLs are no longer available.
If, however, the mailbox is moved into a COS with a lower index
value than that originally assigned, all entries in that mailbox’s PDLs
remain valid. New entries cannot be defmed beyond the limits
specified for the currently assigned COS.
Using INSTALL
There are no questions pertaining to the CSTAT Table in the INSTALL program. To modify
CSTAT entries, use the UPDATE program.
Using UPDATE
From UPDATE you can LET and MODIFY.
LIST
Listing the CSTAT Table
:
‘\,
LS
2:
?