Toshiba VP 300 Answering Machine User Manual


 
r4.1
LOCATION TABLE FOR MULTI-CABINET NETWORKING
Multi-cabinet networking refers to situations
where
more than one Zxhiba VP
System is linked
together
behind one PBX at one location.
The LoCATION Table ior a multi-cabinet network
cznhns the name of each cabinet in-the
networlrandthenameoftberontensedtoaccessit.
Example
of a
LCKATION
Table:
n
How the LOCATION Table is Used
The Toshiba VP
System uses the LOCATION
Table to
find:
l
Which route to use from the ROUT& Table amtaining the digits to access each cabinet
l
If that location has a
‘Ibshiba
VP System cabinet
l
If it is located
on the same
PBX
.,
n
How to Configure the LOCATION Table
A maximum of 498 locations may be defied in the LOCATION Table.
.
LOCATION NAME Descriptive name to identify each location in the multi-cabinet
network. Example:
C-1,
CAB& etc.
ROUTE CHOICES Name of the route used to access the other cabinets on the
network. Only one route can be
defmed.
HAS SYSTEM Only used for
remote
networking.
SAME LOC Automatically set to Y for multi-cabinet networking.
AUTH LEN
PUBLIC/TIE NET
NUMBERS
Not currently in
use.
Only used for
remote
networking.