Filter
Top Products
134
Data
Use the Data sub menu to set the Auto Detect feature for
when you receive data and to set the
Data Baud Rate.
1.
In standby mode, press the left soft key ( )
Menu,
then press , , for
Data. The sub menus
listed in the following table appear in the display.
2. Use the navigation key to highlight the Data sub menu of
your choice, then press
.
3. Use the navigation key to highlight the desired Auto
Detect
or Baud Rate settings, then press
.
Service LED
You can turn the Service LED on the front of your phone on or
off. The Service LED notifies you of the charge status,
incoming calls, and more.
1. In standby mode, press the left soft key ( )
Menu,
then press , , for
Service LED. Off and On
appear in the display.
2. Use the navigation key to highlight Off or On, then press
. Your selection is saved.
Sub menu Function
1 Auto Detect
Set your phone’s data auto detect capabilities.
Options are data off, data for next call, and data
until powered off.
2 Baud Rate
Set the baud rate for data connections. Options
are Auto, 19200, 38400, 57600, 115200,
and 230400.
MetroA610.book Page 134 Tuesday, July 6, 2004 3:12 PM