Filter
Top Products
Setup 121
Backlight
Set the display or keypad backlight to remain on for a
specified time or remain on as long as the flip is open.
Prolonged backlight use drains your battery faster.
1.
In standby mode, press the left soft key ( ) Menu, then
press , ,
for
Backlight. The following sub
menus appear in the display.
2. Use the navigation key to highlight a sub menu.
3. Press to enter the highlighted option’s sub menu and
change settings as desired.
Auto hyphen
Auto Hyphen automatically hyphenates phone numbers as
they are entered. For example: 580-437-0000.
1. In standby mode, press the left soft key ( ) Menu, then
press , , for
Auto Hyphen. Yes and No
appear in the display.
2. Use the navigation key to highlight the desired setting.
3. Press to confirm the setting.
Option Function
1 Lcd
Sets the time the LCD backlight remains on after
a period of inactivity. Optional settings are 5, 10,
15 seconds and Folder Open.
2 Keypad
Sets the time the keypad backlight remains on
after a period of inactivity. Optional settings are 5,
10, 15 seconds and Folder Open.
3 Power save
Unless the backlight setting for the LCD has been
changed, the backlight dims after a minute of
inactivity, and then turns off. With Power save
enabled, the backlight for the LCD is always dim,
and the backlight is turned off after 15 seconds of
inactivity.
MetroA610.book Page 121 Tuesday, July 6, 2004 3:12 PM