Filter
Top Products
Setup 123
3. Use the navigation key to highlight Preloaded, then
press .
4. Use the up and down volume keys to scroll through the
ringer types and melody tones for the selected ringer
type. Each tone plays as you scroll through the list.
5. When the desired ringer type plays, press to save
the setting.
Key Beep
Key Beep allows you to adjust the volume level and the tone
length generated by the keypad each time you press a key.
1. In standby mode, press the left soft key ( ) Menu, then
press , , for the
Key Beep sub menu.
Volume is highlighted.
2. Press
.
3. Use the volume keys or the navigation key to set the
volume level for keypad tones. A tone sounds as you
increase or decrease the volume setting.
4. Press when the desired key beep volume setting
is reached. You’re returned to the
Key Beep sub menu.
5. Use the navigation key to highlight Tone Length, then
press .
6. Use the navigation key to highlight Long or Normal.
7. Press to save your settings.
MetroA610.book Page 123 Tuesday, July 6, 2004 3:12 PM