Filter
Top Products
25
When you complete the configurations, you can press Apply to save all the settings. The system
will restart to take the new settings effect.
Register Expire
Parameter description:
Field Description
Register Expire Period
You can fill in the register expire period in this field. The
IPX-600 will periodically re-register to the Proxy Server.
Table 15. Expire setting description
Proxy Server
The IPX-600 works as a SIP proxy server for the other SIP devices, any SIP devices can register
to IPX-600 to the WAN IP or LAN IP addresses. The IPX-600 can also register to other IPX-600 or other
SIP Proxy server on this setting. The system can allow up to 8 registrations to other proxies.
Parameter description:
Field Description
Reg
This field displays the registration status of the Proxy Server,
green light means registered successfully.
Name
This is the name of this registration. And this name will be
used in the Call Route settings.
User Name
The user name of this registration item.
Password
The password of this registration item.
Auth. ID
The authentication ID of this registration item.
Proxy IP
The IP address of the registered SIP proxy server.
Proxy Port
The port number of the registered SIP proxy server.
Outbound Proxy
If IPX-600 is behind the NAT, you should enable this option.
This will show the IP address and port of the registered SIP
outbound proxy.
DID (Direct Inward
D
ialing)
Any calls originating from the registered ITSP to IPX-600 will
go into the auto-attendant or direct to the selected user or
hunting group.
Action
You can modify the existing entry by clicking Edit button.
Table 16. Proxy server setting description
After Delete/Add/Edit of any items, you need to press the Apply button to save the configurations
to the system. And all the settings will work immediately after pressing the Apply button. Do not need to
restart the system to let this settings work.